900 PS Super Challenger von Mr. Norm
Armed with a pavement pounding 900 horsepower Kenne Bell supercharged and intercooled 6.1 Hemi engine, the Super Challenger is the new Sheriff in town. The neon lit streets and shadowy alleys are rife with pimped out sedans, wicked coupes, and other automotive scum. Life is over for these creatures of the night, ’cause Mr. Norm and the Super Challenger are here to run ‘em out of Dodge.
Just the sight of the Super Challenger strikes fear into the hearts of carminals everywhere. With its Jet Black body and Blazing Red stripe, punctuated with the legendary Mark of Mr. Norm on the front fenders, they’ll know that they’ve more than met their match when they face off against the Super Challenger.
And no super heroes ride would be complete without a Katzkin custom leather interior. The guts of the Super Challenger exudes Mr. Norm’s take no prisoners attitude, with its black leather and contrasting red accents. Our hero grabs gears with a Hurst Pistol Grip Shifter, the most powerful shifter in the world. Do ‘ya feel lucky, punk?
Mr. Norm’s Super Challenger forged wheels by Rodtana wear Pirelli Scorpion Zero tires that grip the asphalt with cat woman like claws. Hotchkis Performance created the lowered suspension that provides the crouching, ready to strike stance, while SSBC 8 Piston Disc Brakes are ready to take a Big Bite out of crime.
The bellicose sound produced by the Corsa Performance exhaust on the Super Challenger may wake up the dead in its attempt to muffle the 900 horsepower raging elephant that resides just beneath the Mopar Six Pack hood, but it’s music to Mr. Norm’s ears. And the Super Challenger’s front spoiler and side scoops by Hulst Customs provide the finishing touch to the exterior, providing proof positive that badass really is beautiful.
900 PS Super ‘Cuda von Mr. Norm
Drawing inspiration from its race bred relative, the legendary 1970 AAR Cuda, the Super Cuda features a dramatic restyling package that matches heart stopping good looks with heart pounding performance.
Amplifying its presence, the Super Cuda features a modern interpretation of the classic Cuda grille and tail panel, coupled with an aggressive front spoiler that infuses it with undeniable character. Reinforcing the theme, the sides of the Hemi Orange Super Cuda are boldly accented with satin black strobe stripes by Sharpline Converting that match the sinister Sherwin-Williams Planet Color Badass Black that covers the hood and adjacent surfaces, much like its storied ancestor. Inside, the cockpit features a Hurst Shifter for precise shifting of the five speed transmission, a Katzkin “Barracuda” custom leather interior with Hemi Orange perforated inserts and Super Cuda monogrammed carpet mats by Designer Mat.
And if all that’s not enough, just wait ’til you push the start button and awaken the wild 900 horsepower Kenne Bell supercharged 16 plug HEMI engine. Singing its siren song through a low restriction Corsa Performance cat back dual exhaust system, the Super Cuda balances tire smoking power with a tuned suspension engineered by Hotchkis Performance. Insuring fade free stops from high speed are massive Stainless Steel Brakes V8 8-Piston calipers. Rolling stock consists of Rodtana 22″ modular wheels matched with Pirelli Scorpion Zero Assimetrico ultra high performance tires.
Add it all up and you’ve got the new Mr. Norm’s Super Cuda, the street lethal sport coupe. Armed with nothing less than a ground pounding 6.1 Hemi engine, it’s complemented by a chassis with just the right mix of components to harness its power. The Super Cuda looks like a wolf in wolfs clothing, because it is. This is one vehicle that speaks loudly and carries a very big stick.
Dodge Challenger Blacktop
A menacing creation from the minds of the Mopar Underground design team. The Dodge Challenger Blacktop began life as a 2009 Dodge Challenger R/T equipped with a 5.7-liter HEMI® V-8 and six-speed manual transmission. Mopar Underground added custom-made spoilers and front brow. To finish off the look, a black-on-black racing stripe paint scheme was added. The “in the weeds” stance and superb handling characteristics are accomplished by the Mopar coil-over suspension and strut tower brace. Blacktop rolls on massive 22-inch Dodge Viper wheels from Factory Reproductions wrapped in Dunlop tires measuring 265/35 R22 front and 305/30 R22 rear. To ensure the powertrain can keep up with the suspension, underhood performance is enhanced. The addition of Mopar components, including a cat back dual-exhaust, cold air intake, allow the HEMI V-8 to breathe easy. The interior has been enhanced with Katzkin leather seating finished in bright red plus a Mopar Kicker audio system for premium sound.
Dodge Challenger Targa
The Dodge Challenger Targa is a full-blown competition car that raced and completed the infamous Targa Newfoundland race this year. “Samantha” started life as a Mopar Challenger drag race package car. Many features were borrowed from the Dodge Viper, but the most noticeable is the snakeskin green paint. To keep the front end down, a Mopar chin spoiler “Splats” developed in a full scale wind tunnel, was added to the front of the car. Mopar gauges keep a close eye on the vital signs. The Mopar hood is equipped with a scoop to make room for the 540-horsepower, 490 lb. ft. of torque, 392 HEMI® V-8 Mopar crate motor. Mated to a Tremec six-speed manual gearbox, the engine blasts power to the rear wheels through a production 2009 modified gear ratio in the rear end. An abundance of fade resistant stopping power comes from Stop-Tech brakes. Up front, the six-piston calipers clamp 380-millimetre rotors, while in the rear, four-pot calipers work with 355-mm rotors. Developed by KW, the race suspension and brake upgrades came from a proven hero - the Dodge Viper ACR, which just broke the production car lap record at the world-renown Nurburgring in Germany. With only a few exceptions, the Dodge Challenger Targa was built using parts available through Mopar.
Dodge Challenger SRT10 Concept
Auburn Hills, Mich., Oct 14, 2008 - The opportunity for SRT engineering to “one-up” itself comes to fruition with the 2009 Dodge Challenger SRT10 Concept. Power for the 2009 Dodge Challenger SRT10 Concept comes from the Dodge Viper 8.4-liter, all-aluminum V-10 engine with 600 horsepower and 560 lb. ft. of torque. It’s a vehicle that delivers the well-known SRT credo of benchmark performance. The Dodge Challenger SRT10 Concept includes a fresh coat of Tornado Red paint with a carbon-fiber deck lid and hood. The “shaker hood” is a nostalgic representation of the 1970 HEMI Cuda, giving the 600-hp Viper V-10 engine room to breathe. Brakes have been upgraded and BILSTEIN® shocks at all four corners improve handling balance. The interior boasts sport seats and carbon-fiber accents throughout and, of course, true to the Viper-powered vehicle lineage, a red engine start push-button in the dash.




Waaahnsinn!!!!
















